Ubiquiti Networks RD-5G31-AC Satellite Antenna – Best price available at MIATLANTIC OÜ

The Rocket Dish RD-5G31-AC is a carrier-grade 2x2 bridge antenna designed to integrate seamlessly with RocketM radios (RocketM sold separately). Pair RocketM's radios with the range of Rocket Dish antennas to create endpoints for high-performance point-to-point (PtP) backhaul. On the right is an instance of how to establish the Rocket Dish. Pair RocketM's radios with the range of Rocket Dish antennas to create endpoints for high-performance point-to-point (PtP) backhaul.

Products may differ from pictures and are subject to change without notice.

Terms of use:

Ubiquiti radio equipment must be professionally installed. Protected Ethernet cable and basis must be used as a disorder of the product guarantee. TOUGHCable™ is designed for outdoor installations. It is the customer's responsibility to comply with local country regulations, including operation within legal channels, output power, and Dynamic Frequency Selection (DFS) requirements.

Installation requirements

• Rocket™M5 AC PTP, RocketM5 Titanium, RocketM5 or RocketM5 GPS (sold separately)

• 16mm or 5/8" wrench

• 24mm or 15/16" wrench

• Category 5 (or better) shielded cable should be used for all wired Ethernet connections and should be grounded through the PoE's AC ground wire. We recommend that you use Ubiquiti Networks' industrial-grade shielded Ethernet cables to protect your network from the harshest environments and damaging ESD attacks. For more details visit https://miatlantic.eu

Software:

Air OS is an intuitive, versatile, and highly developed Ubiquiti firmware technology. It is very intuitive and can be operated without training. Behindhand the user interface is a robust firmware building that enables high-performance outdoor multipoint schmoosing.

• Protocol support

• Ubiquitous channelization

• Spectral width adjustment

• ACK automatic timing

• AAP technology

• Multilingual support

Air View is integrated into all Ubiquiti M products and provides advanced spectrum analyzer capabilities: waterfall, waveform, and real-time spectrum views allow operators to identify noise characteristics and plan their networks to minimize noise interference.

• Waterfall aggregates energy for each frequency over time.

• Collected waveform aggregate energy.

• Real-time energy is displayed in real-time as a function of frequency.

• Log automated air views to record and report results.

air Control is a powerful and intuitive web-based server network management application that allows operators to centrally manage an entire network of Ubiquiti devices.

• Network map

• Monitor device status

• Massive firmware upgrade

• Web UI access

• Manage device groups

• Task scheduling

Protect your network from the harshest environments with industrial-grade shielded Ethernet cables from Ubiquiti Networks,

Tough cable.

Improve Performance Dramatically improve your Ethernet link status, speed, and overall performance with Ubiquiti TOUGH cables. Extreme Weatherproof Intended for outdoor use, TOUGHCables will work even in the harshest weather and surroundings. ESD Damage Defense Protect your network from damaging static discharge (ESD) attacks. EXTENSION CABLE SUPPORT TOUGHCables were developed to improve power handling performance over extended cable run lengths. Invulnerable your network TOUGHCable is currently obtainable in two forms: PRO Shielding Protection and CARRIER Shielding Protection. TOUGHCable PRO is a Group 5e outdoor carrier grade shielded cable with combined ESD drain wire. TOUGHCable CARRIER is a Category 5e outdoor carrier grade shielded cable with integrated ESD drain wire, anti-crosstalk divider, and secondary shielding. It is rated to provide the best performance on Gigabit Ethernet networks. Additional Information:

• 24 AWG copper wire pair

• 26 AWG integrated ESD drain wire for protection against ESD attack and damage

• PE outdoor grade weatherproof jacket

• Multilayer shielding

• Available in 1000 ft (304.8 m) lengths

Tough cable connector:

Designed for use with Ubiquiti TOUGHCables,

TOUGHCable connectors protect against ESD attacks and Ethernet hardware damage while allowing rapid field deployment without soldering. Standard TOUGHCable connectors are available in packs of 100. bag, while the TC-GND version includes a ground wire and is available in packs of 20. Bag. ESD doses are the leading cause of device disappointment. The following diagram illustrates areas of the network that are vulnerable to ESD attacks. The following diagram illustrates areas of the network that are vulnerable to ESD attacks.